DISASSEMBLY AND ASSEMBLY STARTING MOTOR STARTING MOTOR Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. Warning! Disconnect the cable from the negative (-) terminal of the battery. REMOVAL 1. Disconnect negative (-) terminal (1) of the battery located behind the radiator grille. 2. Open engine hood side cover and lock into position. 3. Disconnect cable (2) and harness wires (3) and (4). 4. Remove ground connection (5) with two mounting bolts (6), then remove starting motor assembly.
INSTALLATION Ъ Install starting motor assembly in reverse order of removal Mounting bolt: 32 ±4 lbf.ft (43 ±6 Nm) (4.38 ±0.61 kgm) 30-11 WA250-3L