Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY TURBOCHARGER TURBOCHARGER Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. REMOVAL 1. Open engine hood left side door and lock into position. 2. Remove heat shield (1). 3. Disconnect muffler clamp (2), air intake clamp (3), oil drain line (4) and oil lube line (5). 4. Remove turbocharger. Refer to “ENGINE SHOP MANUAL”. INSTALLATION Ъ Install turbocharger assembly in reverse order of removal. Refer to “ENGINE SHOP MANUAL”. 30-18 WA250-3L