DISASSEMBLY AND ASSEMBLY THERMOATAT THERMOSTAT Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. REMOVAL 1. Drain water system of coolant (1). Refer to “OPERATION & MAINTENANCE MANUAL”. 2. Open engine hood left side door and lock into position. 3. Disconnect screw clamp on thermostat and remove hose connection (2). 4. Remove thermostat. Refer to “ENGINE SHOP MANUAL”. INSTALLATION Ъ Install thermostat in reverse order of removal. Refer to “ENGINE SHOP MANUAL”. 30-17 WA250-3L