Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY NOZZLE HOLDER NOZZLE HOLDER Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. REMOVAL 1. Remove hood. Refer to “ENGINE HOOD REMOVAL”. 2. Remove air cleaner (1) and bracket (2). Refer to “MUFFLER AND AIR CLEANER REMOVAL”. 3. Remove muffler (3) and mount bracket (4). Refer to “MUFFLER AND AIR CLEANER REMOVAL”. NOTE: When the muffler bracket is removed, the air conditioner compressor and mount bracket comes off with it. 4. Remove turbocharger crossover tube (5) (air intake). 5.

Remove nozzel holder (6). Refer to “ENGINE SHOP MANUAL”. INSTALLATION Ъ Install nozzel holder in reverse order of removal. Refer to “ENGINE SHOP MANUAL”. 30-16 WA250-3L