Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY WATER PUMP WATER PUMP Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. Warning! Disconnect the cable from the negative (-) terminal (1) of the battery. REMOVAL 1. Open engine hood left side door and lock into position. 2. Drain water system (coolant) (2). Refer to “OPERATION & MAINTENANCE MANUAL”. 3. Remove the Fan Belt from the Alternator and Belt Tennsioner. Refer to “ALTERNATOR ASSEMBLY”. 4. Remove the alternator. Refer to “ALTERNATOR ASSEMBLY”. 5. Remove the Water Pump (3).

Refer to “ENGINE SHOP MANUAL”. INSTALLATION Ъ Install the water pump assembly in reverse order of removal. Refer to “ENGINE SHOP MANUAL”. 30-15 WA250-3L