Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY ENGINE OIL COOLER ENGINE OIL COOLER Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. Warning! Disconnect the cable from the negative (-) terminal of the battery. REMOVAL 1. Disconnect negative (-) terminal (1) of the battery located behind the radiator grille. 2. Open engine hood left side door and lock into position. 3. Drain the engine oil. Refer to “OPERATIONAL & MAINTENANCE MANUAL”. 4. Remove the alternator. Refer to “ENGINE SHOP MANUAL”. 5. Remove the turbocharger drain line (2). 6.

Remove the Oil Filter. Refer to “OPERATIONAL & MAINTENANCE MANUAL”. 7. Remove the Engine Oil Cooler (3). Refer to “ENGINE SHOP MANUAL”. INSTALLATION Ъ Install engine oil cooler in reverse order of removal. 30-14 WA250-3L