Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY FUEL INJECTION PUMP FUEL INJECTION PUMP Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. REMOVAL 1. Disconnect negative (-) terminal (1) of the battery located behind the radiator grille. 2. Open engine hood right side cover and lock into position (3). 3. Disconnect the throttle linkage (4). 4. Disconnect the fuel inlet line (filter to pump line) (5). 5. Disconnect the return (6) and drain lines (7). 6. Disconnect the electrical wiring (8). 7.

Disconnect the six fuel lines (pump to injectors) (9). 8. Remove the Fuel Injection Pump. Refer to “ENGINE SHOP MANUAL”. INSTALLATION Ъ Install fuel injection pump assembly in reverse order of removal 30-13 WA250-3L