Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY MUFFLER AND AIR CLEANER MUFFLER AND AIR CLEANER Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. Warning! Disconnect the cable from the negative (-) terminal of the battery. REMOVAL 1. Remove engine hood. Refer to “REMOVAL OF ENGINE HOOD”. 2. Remove cover (1), (2). 3. Remove clamps (3) connecting muffler with turbo charger. 4. Remove band (4) fixing muffler (5) to mounting bracket (9). 5. Remove bracket (6), (7). i Be careful not to miss the spacers. 6.

Remove clamp (11) for air cleaner hose and 3 bolts mounting air cleaner, then remove air cleaner (8). 7. Remove mounting bracket (9), (10). INSTALLATION ! Carry out installation in the reverse order of removal. Clamp for Exhaust muffler: Torque to: 7.8 Nm (0.8 kgm) 30-28 WA250-3L