DISASSEMBLY AND ASSEMBLY TORQUE CONVERTER, TRANSMISSION TORQUE CONVERTER, TRANSMISSION Warning! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. Warning! Remove cover (1-1) at the top of the hydraulic tank, loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then operate the steering wheel and control levers several times to release the remaining pressure in the hydraulic piping. !
Loosen plug (1) at the top of the hydraulic tank filter to prevent the oil inside the hydraulic tank from flowing out. Warning! Disconnect the cable from the negative (-) terminal of the battery. REMOVAL 1. Drain oil Ъ Loosen drain valve (2) and drain transmission oil. Transmission oil: 35 L 2. Covers, ladder 1) Remove hood panel (3). 2) Remove hood covers (4) and (5). 3) Remove rear frame inspection cover (6). 4) Remove covers (7) and (8) under cab. 5) Remove ladder fender assembly (9). 30-30 WA250-3L