Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY TORQUE CONVERTER, TRANSMISSION 3) Disconnect hose (22) between radiator and radiator subtank at radiator end. 4) Disconnect air conditioner hoses (23) and (24). Ъ Carry out the oil return operation for the compressor, then use a gauge manifold and release the refrigerant slowly from the core of the compressor high-pressure and low-pressure valves. 5) Remove heater hose clamp (25) from hood. 6) Remove mounting plate (27) of rubber (26) from hood. 7) Remove brake hose clamp (28). 8) Disconnect window washer hoses (29) and (3) from window washer tank (31). Ъ Make marks to distinguish the hoses. 9) Disconnect brake oil level sensor connector (32).

10) Remove brake tank (33). Ъ Open the inspection cover at the top of the hood. Ъ Tighten the cap of the brake tank and secure it to the mounting clamp on the frame for the grease gun. 30-32 WA250-3L