DISASSEMBLY AND ASSEMBLY TORQUE CONVERTER, TRANSMISSION 11) Fit eye-bolt to top of hood (34) and sling, then remove mounting bolts and lower hood assembly slowly. Ъ Open the side door of the hood to prevent interference. 4. Disconnect air conditioner hoses (35) and (36) from under air conditioner unit. i After disconnecting the air conditioner hoses, cover up the openings to prevent any entry of dirt or water. Loosen the clamp of heater hoses (37), (38), and disconnect the hoses. 5. Fuel control cable 1) Loosen locknut (39) of fuel control cable. 2) Remove nut of fuel control cable (40) and disconnect from injection pump. 6.
Work equipment control cable Disconnect work equipment control cable (41) at main control valve end, and remove intermediate clamps (42) and (42-1). 30-33 WA250-3L