Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION 4. Transmission control valve 1) Remove accumulator valve (7). 2) Sling transmission control valve (7-1), then remove mounting bolts and lift off. Ъ Assemble guide bolts in the mounting bolt holes. Transmission control valve: 46 kg 5. 2nd, 4th shaft cover, tachometer pickup outlet port Remove 2nd and 4th shaft cover (8) or tachometer pickup outlet port (9) and O-ring (8-1). Ъ After removing the tachometer pickup outlet port cover, be careful not to damage the tachometer gear shaft. Ъ Turn over the torque converter and transmission assembly. 6. Rear housing 1) Remove torque converter pilot cap (10).

2) lnstall tool A1 to rear housing (11), then sling housing. Ъ Install tool A1 securely so that it does not come off. 30-46 WA250-3L