DISASSEMBLY AND ASSEMBLY TRANSMISSION 3) Using forcing screws, raise rear housing (11), then use tool A1 to lift it off. Ъ Remove slowly and be careful not to damage the seal ring. Ъ When removing, install guide bolts to front housing (44) and lift off horizontally. Rear housing, torque converter assembly: 160 kg 7. Torque converter Lift off torque converter (12) from rear housing (11). Ъ Before removing, use a felt pen to make match marks on the mating surface of the housing and torque converter. Ъ The length of the mounting bolts is different, so make marks. 8. Pump (torque converter, loader) 1) Remove snap ring (13) at torque converter pump mount end. 30-47 WA250-3L