Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION 10. 2nd and 4th, 1st and 3rd clutches 1) Pull out 2nd and 4th clutch (21) together with 1st and 3rd clutch (22) from housing bearing, then move towards 2nd and 4th clutch output shaft end. Ъ Remove the 1st and 3rd clutch from bearing, then move towards the FORWARD, REVERSE end. 2) Using tool A2, lift off 1st and 3rd clutch (22). Ъ Remove slowly and take care not to hit any other gear. 1st and 3rd clutch: 41 kg 3) Using tool A2, lift off 2nd and 4th clutch (21). 2nd and 4th clutch: 50 kg 11. FORWARD, REVERSE clutch 1) Remove snap ring (23), and set gear (24) in free condition.

Ъ If the idler shaft is removed from the front housing, cool the shaft to -70 E C when assembling. 30-49 WA250-3L