Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION 2) Using tool A3, pull out FORWARD and REVERSE clutch (25). Ъ When removing the FORWARD and REVERSE clutch, gear (24) will hit the REVERSE bearing, so leave the gear half floating. WARNING! Be careful not to get your fingers caught between gear (24) and the housing. FORWARD, REVERSE clutch: 40.4 kg 12. Idler gear 1) Remove gear (24) from housing. 2) Remove snap ring from gear (24), then remove bearing (26). 13. Rear dust seal, oil seal Remove dust seal (27) and oil seal (28). 14. Parking brake assembly Ъ Turn over the front housing, then set stand under the housing. 1) Remove mounting bolts, then remove front coupling (29), holder (30), and O-ring.

Ъ Always assemble set bolt (49) for holding piston from the parking brake front retainer end. Ъ Set bolt: 8 mm, P = 1.25, R = 35 mm 30-50 WA250-3L