Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION 2) Remove mounting bolts (31), and set guide bolts (32) in position. Ъ To make it easier to remove the parking brake assembly, sling the output shaft gear inside the housing. 3) Screw forcing screws into parking brake assembly (33), and remove parking brake assembly. Ъ When removing the parking brake, carry out the removal operation with two workers, give signals to each other and remove the parking brake carefully. Ъ Pull out slowly and be careful not to cut O-ring (46) of spacer (35) at the bottom of the parking brake assembly. Ъ Check the number and thickness of the shims and use for reference when assembling. Parking brake assembly:

37 kg 4) Remove spacer (35). ! Be careful not to damage O-ring (46-1). 30-51 WA250-3L