Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION 15. Emergency steering pump gear 1) Screw forcing screws into emergency steering pump gear (36). 2) Remove mounting bolts of emergency steering pump gear (36). Ъ Pull out the top part first, then pull up. There are places inside the housing where there is interference, so check the inside and remove slowly. 3) Remove O-ring (36-1) from emergency steering pump gear (36). 16. Output shaft gear 1) Remove sling from inside, then support output shaft (37) from outside with support plate. Ъ Fit a cover to the shaft spline to prevent damage to the oil seal. 2) Remove shroud (38). Ъ Be careful not to cut your hand on the edge of the shroud. 30-52 WA250-3L