STRUCTURE AND FUNCTION TORQUE CONVERTER OIL FILTER Path of motive force ! The torque converter is installed between the engine and the transmission. The motive force from the engine enters drive case (2) from flywheel. Drive case (2), pump (8), and PTO gear (drive) (7) are each secured by bolts and are rotated directly by the rotation of the engine. The motive force of pump (8) uses oil as a medium to rotate turbine (1) and transmit the motive force to transmission input shaft (9). ! The motive force of drive case (2) is used as the motive force to drive the gear pump through PTO gear (drive) (7). Flow of oil !
The oil supplied from the torque converter charging pump enters inlet port A, passes through the oil passage of stator shaft (5), and flows to pump (8). The oil is given centrifugal force by pump (8), enters turbine (1), and transmits the energy of the oil to the turbine. Turbine (1) is fixed to transmission input shaft (11), so the motive force is transmitted to the transmission input shaft. The oil from turbine (1) is sent to stator (3) and enters the pump again. However, pari of the oil is sent from the stator through outlet port B to the cooler. 10-11