Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY REAR AXLE REAR AXLE REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. 1. Remove fuel tank. For details, see REMOVAL OF FUEL TANK. 2. Jacking up chassis 1) Set block в between left and right rear axles and rear frame. 2) Jack up chassis and insert block Є under rear frame. Ъ Jack up the rear frame with a garage jack, and set block Є in position when the tires are slightly off the ground. 3. Tire, wheel Fit sling to tire and wheel (1), remove mounting bolts, then lift off .

Tire, wheel: 210 kg 30-106 WA250-3L