DISASSEMBLY AND ASSEMBLY DIFFERENTIAL 4) Remove lock pin (15) and pull out shaft (16), then remove pinion gear (17). Ъ Remove together with spherical surface washer (17-1) at the pinion gear portion. 5) Remove side gear (18) and thrust washer (19). 7. Coupling 1) Remove mounting bolts (20), then remove coupling (22) and O-ring (23). Ъ Do not remove the protector press fitted 23 to the coupling unless necessary. 2) Remove oil seal (24). 3) Using press, remove pinion gear (25) from cage and remove bearing (26). 30-115 WA250-3L