DISASSEMBLY AND ASSEMBLY DIFFERENTIAL 5. Bearing carrier Screw in forcing screws to raise bearing carrier evenly, and remove bearing carrier (7). Remove angle ring. Ъ Check the number and thickness of the shims, and keep them in a safe place. Ъ Mark the left and right bearing carriers to avoid confusing them. 6. Differential carrier 1) Lift off differential carrier assembly (9) from differential housing (8). Ъ When removing the assembly, be careful that the lifting tool does not slip. Differential carrier assembly: 30 kg 2) Remove bevel gear (10), then remove bearing (11) from bevel gear. 3) Remove thrust washer (13) from differential carrier (12), then remove side gear (14). 30-114 WA250-3L