DISASSEMBLY AND ASSEMBLY DIFFERENTIAL DIFFERENTIAL DISASSEMBLY 1. Brake tube Remove brake tube (1). 2. Differential cover Remove bleeder screw (2), then remove differential cover (3). Ъ Install the differential assembly in a stand. Ъ Remove the axle housing. 3. Cage 1) Screw in a forcing screw, then using guide bolt (4), remove cage (5). Ъ Check the number and thickness of the shims, and keep them in a safe place. Ъ Loosen mounting bolts of coupling, and temporarily install the cage. Cage: 17 kg 2) Remove O-ring from cage. 4. Brake piston Screw in forcing screws (3 places) to raise evenly, then remove piston (6).
Ъ If the O-ring of the piston is not damaged, it is possible to install the bleeder screw and blow in air to remove the piston. 30-113 WA250-3L