DISASSEMBLY AND ASSEMBLY DIFFERENTIAL 2) Install guide bolt, assemble shims (35) selected in Step 4, and install cage (5). Mounting bolts: 112.8 ± 9.8 Nm (11.5 ± 1.0 kgm) 8. Adjusting backlash 1) Measure backlash of bevel gear with a dial gauge. Ъ First, measure with all the shims inserted at the bevel gear end. Ъ Measure the backlash at 3 places around the circumference of the bevel gear. The variation between the measurements must be within 0.1 mm. 2) To obtain backlash within specified range,move some of shims from bevel gear side to opposite side. Ъ When moving the shims, do not change the total shim thickness. The total shim thickness on the left and right must remain the same.
Ъ Adjust the backlash as follows. If backlash is too LARGE, move shims from B to A If backlash is too SMALL, move shims from A to B. 30-122 WA250-3L