DISASSEMBLY AND ASSEMBLY AXLE HOUSING AXLE HOUSING DISASSEMBLY Ъ The final drives for the front axle and rear axle are different, so be careful not to mistake them when assembling again. 1. Draining oil Loosen drain plug (1) and drain oil from axle. Axle: 17.5 R 2. Differential cover 1) Remove bleeder screw (2), then remove differential cover (3). 2) Install axle on stand. 3. Axle housing 1) Sling axle housing (4), remove mounting bolts, then lift off. Ъ Marks the housings,to distinguish the left and right axle housings. 2) Disconnect axle housing, then remove sun gear shaft (5), brake disc (6) and brake inner ring (7). Ъ Be careful not to damage the face of the brake disc. Axle housing:
130kg 30-126 WA250-3L