DISASSEMBLY AND ASSEMBLY CENTER HINGE PIN 9. Floor wiring Disconnect following wiring connectors from floor wiring (23). ! Front wiring connector (24) ! Rear wiring connectors (25), (26), (27), (28),(29), and (30) ! Transmission wiring connector (31) ! Disconnect ground terminal (32) from floor. 10. Cab, floor 1) Remove cover (33) from floor support Ъ Remove the opposite side also. 2) Sling cab and remove floor support mount bolts (34) and (35). Ъ Remove the bolts on the opposite side in the same way. 30-139 WA250-3L