Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY CENTER HINGE PIN 3) Raise cab (36) and lift off floor support (37) as assembly. ROPS Cab floor assembly: 653 kg 11. Steering cylinder Remove left and right steering cylinder rod pins (38). Ъ If there are shims, check the number and thickness of the shims, and keep in a safe place. 12. Hydraulic piping 1) Remove hose bracket (39) for work equipment piping from front frame. Ъ Remove the clamp of front frame wiring (40). 2) Remove hose bracket (41) for work equipment piping from rear frame. Ъ Remove brake tube T-clamp (42) from the bracket. 3) Remove mounting bolts (44) of steering tube bracket (43) from frame. 30-140 WA250-3L