Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY CENTER HINGE PIN 4) Remove mounting bolts (46) of steering tube bracket (45) from frame. 5) Disconnect priority valve hose (47) at priority valve end. 13. Supporting frame 1) Adjust height of rear frame and set block в in position. 2) Set stands Є under counterweight. 3) Adjust height of front frame on left and right, and set block д in position. Ъ Be extremely careful when adjusting the height of the frame. 14. Lower hinge pin Remove lock bolt, and pull out lower hinge pin (48). Ъ Be extremely careful when adjusting the height, and set so that the pin can be removed easily by hand. 30-141 WA250-3L