DISASSEMBLY AND ASSEMBLY CENTER HINGE PIN 15. Upper hinge pin 1) Remove locknut (49) and washer (50). 2) Remove pin mounting bolts, then pull out upper hinge pin (51). Ъ There are shims between the retainer and frame, so check the number and thickness of the shims, and keep in a safe place . 16. Disconnection of frame 1) Jack up pallet under bucket (52) with palleter, remove safety bar, rotate tire (53) by hand, and pull out front frame to front. Ъ Be extremely careful to maintain the balance when carrying out this operation.
Ъ Be careful not to let the spacer at the bottom of the upper hinge get caught in the rear frame, and insert a bar between the rear frame and front frame to raise the front frame while disconnecting. 2) After disconnecting frame, remove spacer (54) and dust seal (55) under upper hinge. 17 Lower hinge 1) Remove dust seal (56) from front frame. 30-142 WA250-3L