Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY CENTER HINGE PIN 2) Remove mounting bolts, then remove retainer (57). Ъ If there are shims between the retainer and frame, check the number and thickness of the shims, and keep in a safe place . 3) Remove dust seal (58) from retainer. 4) Remove bearing (59) and spacer (60) from front frame. 18. Upper hinge 1) Remove spacer (61). 2) Remove mounting bolts, then remove retainer (62). Ъ There are shims between the retainer and frame, so check the number and thickness of the shims, and keep in a safe place. 3) Remove dust seal (63) from retainer (62). 4) Remove bearing (64) and spacer (65) from front frame. 30-143 WA250-3L