DISASSEMBLY AND ASSEMBLY STEERING VALVE STEERING VALVE REMOVAL WARNING! , Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. WARNING! Remove the cover at the top of the hydraulic tank, and loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then operate the steering wheel and control levers several times to release the remaining pressure in the hydraulic piping. ! Loosen the plug at the top of the hydraulic tank filter to prevent the oil inside the hydraulic tank from flowing out.
For details, see REMOVAL OF TRANSMISSION, TORQUE CONVERTER ASSEMBLY. 1. Remove steering post cover (2). 2. Remove 6 plugs and lift boot (3) up. 3. Remove column connecting bolt (4). 4. Remove covers (5), (6), and (7) under floor. 30-148 WA250-3L