DISASSEMBLY AND ASSEMBLY CENTER HINGE PIN ! Refilling with oil Tighten drain plug at the top of the hydraulic tank filter and add hydraulic oil through oil filler to the specified level. Ъ Run the engine to circulate the hydraulic oil through the system. Then check the oil level again. ! Filling with gas Ъ Fill the air conditioner with gas. (R134a) Ъ Guideline for amount when filling: 1.5 - 1.6 kg Ъ Before filling with refrigerant, always use the repeat vacuum method to completely evacuate. Ъ Do not use the can of refrigerant upside down or use any other mistaken method. Be careful not to let liquid freon get into the refrigerating system.
Ъ Do not operate the compressor before charging with refrigerant. Ъ Check that the refrigerant level is correct. Ъ Check the oil level in the compressor. (Specified oil level: 150 cc ND-OIL8) +14 -0 30-147 WA250-3L