DISASSEMBLY AND ASSEMBLY STEERING VALVE INSTALLATION ! Carry out installation in the reverse order of removal. Ъ Align the spline at the steering column end and the spline at the steering valve end. Column connecting bolt: 54.9 ± 6.9 Nm (5.6 ± 0.7 kgm) Bracket mounting bolt, steering valve: 51.5 ± 7.6 Nm (5.25 ± 0.75 kgm) ! Refilling with oil Tighten plug (1), remove oil filler cap (2), then add hydraulic oil through oil filler to the specified level. Ъ Run the engine to circulate the oil through the system. Then check the oil level again. 30-150 WA250-3L