Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY MAIN CONTROL VALVE MAIN CONTROL VALVE REMOVAL WARNING! Apply the parking brake and put blocks under the wheels to prevent the machine from moving. 1. Raise boom and set support в or tool G in position, then remove front cover (1). WARNING! Remove the cover at the top of the hydraulic tank, and loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then operate the steering wheel and control levers several times to release the remaining pressure in the hydraulic piping. ! Loosen the plug at the top of the hydraulic tank filter to prevent the oil inside the hydraulic tank from flowing out. 2.

Disconnect wiring connector (2) of main control valve. 3. Disconnect work equipment control cable (3) at main control valve end. 4. Disconnect hydraulic piping at main control valve end. 1) Hose (4) between hydraulic tank and main control valve 2) Hose (5) between hydraulic tank and main control valve 3) Hose (6) between priority valve and main control valve 4) Hose (7) for bucket cylinder 30-161 WA250-3L