Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY POWER MASTER CYLINDER POWER MASTER CYLINDER DISASSEMBLY 1. Power master cylinder 1) Remove linkage rod (2) from power master cylinder (1). Ъ Protect and store insertion end of piston of linkage rod from damage with masking tape. 2) Disconnect power cylinder (3) and master cylinder (4). 2. Disassembly of master cylinder 1) Remove C-ring (5) from body (4) and take out secondary piston (6). 2) Remove stopper bolt (7). Hold brake oil hole (8) and stopper bolt hole (9) with finger, then blow air from brake oil hole (10) to take out primary piston (11). Ъ Do not blow air in suddenly as the piston will fly out. 30-168 WA250-3L