Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY POWER MASTER CYLINDER 8) Assemble power piston (16) and cylinder cover (14) to spool (22), then set guide shaft (a) in position. Ъ To prevent power piston (16) and cylinder cover (14) from dropping inside the body, stop them at the top of the body. 9) Push in guide shaft (a) with a press, bend springs (19) and (20), and keep in position. Ъ Keep snap ring (15) until the completion of assembly. 10) Lower power piston (16) only, and push in evenly on the left and right with both thumbs. Ъ When assembling the power piston, do not hit it in with a hammer. Ъ When assembling power piston (16), apply the force evenly. Never use excessive force.

11) Check that there is no damage to O-ring of power piston (16), then assemble cylinder cover (14). 12) Secure cylinder cover (14) with snap ring (15). 30-173 WA250-3L