DISASSEMBLY AND ASSEMBLY POWER MASTER CYLINDER 13) Install dust cover (13). 4. Assembly of master cylinder 1) Insert the primary piston (11) in body (4). Ъ Insert the piston carefully to prevent damage to the seal cup. Never force it into position. Body and piston: Oil (brake oil) 2) Push piston (13) and tighten stopper bolt (7) by hand. Ъ After tightening as far as possible by hand, tighten fully. Stopper bolt: 10.8 ± 2 Nm (1.1 ± 0.2 kgm) 3) Insert secondary piston (6) in body (4). Body and piston: Oil (brake oil) Ъ When assembling the piston, be careful not to damage the inside of the body and the outside of the piston. Ъ Be careful not to get the O-ring caught.
4) Push in secondary piston (6), then install C-ring (5). Ъ Fit the C-ring properly in the groove. 30-174 WA250-3L