Komatsu — TRANSMISSION

MAINTENANCE STANDARD TRANSMISSION 40-11 No.

Check item Criteria Remedy 22 Clearance (F) between output shaft oil seal and housing Standard size Tolerance Standard clearance Clearance limit Replace Shaft Hole 100 +0.4 +0.2 +0.054 0 -0.146- -0.4 - 23 Inside diameter of housing seal ring contact surface Standard size Tolerance Repair limit 50 +0.05 0 0.05 (wear) Width of shaft seal ring groove 3.2 +0.076 0 3.5 Width of seal ring 3.0 0 -0.13 2.6 Thickness of seal ring 2.29 0 -0.1 2.1 24 Outside diameter (R) of sliding portion of coupling oil seal 75 0 -0.074 0.05 (wear) 25 Outside diameter (F) of sliding portion of coupling oil seal 75 0 -0.074 0.05 (wear) 26 Clearance between parking brake housing and case Standard size Standard clearance Clearance limit 0.95 0.35 - 1.55 - 27 Free rotation torque of output shaft 0.1 - 1 Nm (0.01 - 0.10 kgm) Adjust shim 28 Clearance (R) between output shaft dust seal and housing Standard size Tolerance Standard clearance Clearance limit Shaft Hole 100 +0.3 +0.1 +0.054 0 -0.046- -0.3 - 29 Clearance (F) between output shaft dust seal and housing 100 +0.3 +0.1 +0.054 0 -0.046- -0.3 -