Komatsu — TRANSMISSION

MAINTENANCE STANDARD TRANSMISSION 2nd, 4th CLUTCH Unit: mm 40-14 No.

Check item Criteria Remedy 1 Clearance between piston and cylinder Standard size Tolerance Standard clearance Clearance limit Replace Shaft Hole Inside 110 -0.27 -0.32 +0.06 -0.07 0.20 - 0.38 0.43 Outside 165 -0.27 -0.32 +0.06 -0.07 0.20 - 0.38 0.43 2 Clearance (R) at bearing press-fitting portion of 2nd, 4th clutch shaft 50 +0.025 +0.009 0 -0.012 -0.009 - -0.037 - 3 Clearance (F) at bearing press-fitting portion of 2nd, 4th clutch shaft 60 +0.030 +0.011 0 -0.015 -0.011 - -0.037 - 4 End play of 2nd gear 0.04 - 1.16 5 End play of 4th gear 0.07 - 1.33 6 Thickness of 4th gear end face thrust washer Standard size Tolerance Repair limit 3.0 ± 0.1 2.7 7 Thickness of 2nd gear, clutch thrust washer 3.0 ± 0.1 2.7