STRUCTURE AND FUNCTION TRANSMISSION CONTROL VALVE 3. Clutch pressure starting to rise (point c point d) ! When the oil from the pump fills the clutch piston, the pressure in the clutch circuit starts to rise. When this happens, the drain circuit of the quick return valve is closed. When the drain circuit of the quick return valve closes, the oil passing through port a enters chamber d and pressure P2 in chamber d starts to rise. When the relationship between P1 and P2 becomes P2 > P1 + P3 (tension of spring (2)), the fill valve moves to the left, shuts off port a, and prevents the clutch pressure from rising suddenly. !
At the same time as the oil from port a flows to the directional spool, the relationship is P2 > P1, so oil also passes through the orifice in the quick return valve and flows into chamber c. P1 rises and P2 also rises at the same time. This process is repeated while maintaining the relationship P2 = P1 + P3 (tension of spring (2)), and the clutch pressure rises. ! The oil from the torque converter outlet port circuit forms the pilot pressure to the modulation fill valve and flows to port e. The pressure at port e changes according to the engine speed.
The relationship is P2 = P1 + P3 + P4 (changes according to engine speed), so if pressure P4 changes, pressure P2 also changes by the same amount. Therefore, pressure P2 rises at the same time by the same amount that pressure P4 changes, so it is possible to create oil pressure characteristics that matches the engine speed. 10-39