STRUCTURE AND FUNCTION TRANSMISSION CONTROL VALVE DIRECTIONAL SELECTOR SPOOL Operation 1. When at neutral ! Solenoid valves (4) and (5) are OFF and the drain port is closed. The oil from the pilot circuit passes through the oil hole in the emergency manual spool and fills ports a and b of the directional spool. In this condition, P1 + spring force (1) = P2 + spring force (2), so the balance is maintained. Therefore, the oil at port c does not go to the FORWARD or REVERSE clutch. 2. When at FORWARD ! When the directional lever is placed at the FORWARD position, solenoid valve (4) is switched ON and drain port d opens.
The oil which is filling port a is drained, so P1 + spring force (1) P2 + spring force (2). When this happens, the directional spool moves to the left, and the oil at port c flows to port e and is supplied to the FORWARD clutch. 10-40