Komatsu — REAR DIFFERENTIAL

STRUCTURE AND FUNCTION AXLE Outline ! The motive force from the engine is transmitted to the front and rear axles via the torque converter, the transmission and the propeller shaft. ! In the axle, the motive force is transmitted from pinion gear (1) to bevel gear (5), shifted 90 E and reduced, and transmit- ted to sun gear shaft (2) via differential (4). ! The motive force of the sun gear is further reduced by planetary gear-type final drive, and transmitted to the axle shaft and wheel. When moving straight forward !

When moving straight forward, the speed of rotation of the left and right wheels is equal, so pinion gear (4) in the differential assembly does not rotate, and the motive force of carrier (6) is transmitted equally to the left and right sun gear shafts (2) via the pinion gear (4) and side gear (3). When stewing ! When slewing, the speed of rotation of the left and right wheels is unequal, so pinion gear (4) and side gear (3) in the differential assembly rotate according to the difference in the left and right rotation speeds, and the motive force of carrier (6) is transmitted to the sun gear shafts (2). 10-51