4. Brush (1) Brushes that are worn beyond wear limit line, or oil soaked, should be replaced. (2) When replacing ground brush, side the brush from brush holder by prying retainer spring back. Wear limit line 1EN0292 5. Armature Coil Short Circuit Test (1) Place armature on a growler. (2) Hold a thin steel blade parallel and just above while rotating armature slowly in growler. A shorted armature will cause blade to vibrate and be attracted to the core. Replace shorted armature. 6EN0600 6. Armature Coil Ground Test Check the insulation between ground commutator segment and the armature coil core. If there should be no continuity. 6EN0601 7.
Armature Coil Open Circuit Check Check the continuity between segments. If there should be continuity. G424 Service Manual Starting System 45