Idle Compensator Main Metering System The idle compensator uses a bimetal. When the carbretor ambient temperature rises during idle or “off idle” running, the bimetal bends enough to open the compensator valve. Now additional air from the choke bore can flow through the auxiliary air passage to the intake manifold directly. It leans out the mixture enough to make up for the proper richness. Fuel metered by the main jet is bled by air from the main air jet and enters the bleed pipe through its holes. The fuel is discharged from the main nozzle and sucked by engine cylinders.
If percolation of fuel arises along the main well, gasoline vapor can escape from the main air jet through the relatively wide outside of the bleed pipe. This prevents liquid fuel from spurting from the main nozzle, thus assuring stable engine operation and easy restarting. To prevent percolation due to conduction of heat from the engine, sufficient cooling of the float chamber periphery is taken into consideration in design of the carburetor. 4. Main metering system The wider the throttle valve opens, the faster the air flow in the venturi and the greater the vacuum in the inner venturi will be. As the vacuum becomes greater, additional fuel is discharged from the main nozzle.
The main metering system is provided with the bleed valve press-fitted to the inner venturi and the main air jet. G424 Service Manual Gasoline Fuel System 62