daewoo G20E-3, G25E-3, G30E-3 — Daewoo G20E-3, G25E-3, G30E-3 — спецификация (EN)

Service Points of Disassembly The following parts must not be disassembled at the time of disassembly. (1) Choke valve and choke shaft (2) Inner venturi (3) Throttle valve and throttle shaft A Return spring/choke rod removal (1) When the spring is removed, avoid prying it with undue force or any other attempt that can cause damage to it. (2) Press the end of the choke rod to force the rod out. Avoid applying a strong force to the plastic grommet of the rod fit-in hole. B Float chamber cover removal (1) Since the screws require great force to loosen, use a Phillips screwdriver that exactly fits in the cross recess in the screw heads.

(2) To remove the float chamber cover, slowly lift it, while using care not to give damage to the float. Don’t tilt the main body, as the pump discharge weight and the related parts may come out and could be lost. 6EN0851 C Pump weight/ball Turn the main body upside down to remove the weight and ball. Main jet D Main jet removal To remove the main jet, be sure to use a screwdriver whose tip exactly fits in the slot of the jet. 6EN0852 G424 Service Manual Gasoline Fuel System 67