daewoo G20E-3, G25E-3, G30E-3 — Daewoo G20E-3, G25E-3, G30E-3 — спецификация (EN)

The converter is a combination regulator and vaporizer. It receives liquid fuel through opening (1) at tank pressure from the fuelock. The fuel is available inside converter vaporizing chamber (9) when carburetor vacuum is felt in converter opening (8). When vacuum is not available at the fuelock or opening (8), primary valve pin (3) puts force on primary regulator valve (2) that makes a seat against an inner passage for the fuel inlet. The pin action is controlled by primary diaphragm with lever (5) and cover (6). Primary spring (13) is in compression when vacuum is not available. The vaporizing chamber decreases LP fuel pressure from the tank to less than atmospheric pressure.

This expansion of the pressurized liquid fuel into vapor, can result in freezing. The heat from the engine coolant increases the temperature of the fuel in vaporizing chamber (9) from approximately -42 ° C (-44 ° F) to +2 ° C (+40 ° F) Fuel Tank 15 1 P0002915 LP Fuel Tank 16 IDES067P The fuel tank is made of heavy steel. The specific size of the tank is measured by the design of the lift truck, desired period of time the lift truck is to be operated before the tank has to be filled and how near an available supply of fuel is. Converter Secondary Components (1) LP fuel inlet opening. (15) Secondary lever assembly. (16) Secondary regulator seat.

When the engine is running, the solenoid on the fuelock allows fuel to flow from the fuelock to converter opening (1). Vacuum is felt through converter opening (8) from the carburetor. This vacuum pulls in secondary diaphragm (7) with the diaphragm link, which moves secondary lever assembly (15). The secondary lever assembly moves secondary regulator seat (16) that opens fuel flow passage in chamber (9). At the same time, the vacuum flows through sensing opening (14) that causes primary diaphragm with lever (5) to pull in. This causes the diaphragm lever to make a pivot on cover (6) fulcrum (pivot point) (4).

Primary valve pin (3) moves away from primary regulator valve (2) with the assistance of primary regulator spring (13). LP Relief Valve When primary regulator valve (2) is off its seat, fuel is permitted to flow into vaporizing chambers (9). The fuel flows around and through the passages of the vaporizing chambers while the heat through the converter body is being taken in by the fuel which causes fuel to vaporize. The heat is a product of the engine coolant that goes in opening (12) and out opening (11). The flow of vapor fuel goes out opening (10) in the converter body, activated by open secondary regulator seat (16) to fuel outlet opening (8), through the fuel line to the carburetor.

P0002917 Relief Valve When the pressure in the LP fuel system gets too high, the relief valve releases the pressure to the atmosphere. The action of the relief valve prevents damage to the fuel lines and other components of the fuel system. The position of the valve is in a direction that the fuel will not get on the operator when the valve is activated. G424 Service Manual LPG Fuel System 75