Oxygen Sensor Cover Housing Connector Sensor device Lead wire 6EN2146 The oxygen sensor installed on the exhaust manifold makes use of the principles of a solid electrolyte oxygen concentration cell. The oxygen concentration cell is characterized by a sharp change of the output voltage in the vicinity of the stoichiometric air/fuel ratio. Electromotive force (V) Stoichiometric ratio Rich Lean Air/fuel ratio 6EN2144 Performance of Three-Way Catalytic Converter Using such characteristics, the oxygen sensor senses the oxygen concentration in the exhaust gas and feeds it to the engine control unit.
The engine control unit then determines if the air/fuel ratio is richer or leaner as compared to the stoichiometric ratio and provides feedback control to adjust the air/fuel ratio to the stoichiometric ratio where the emission purification rate of the three-catalyst convector is optimum. Operating window for converter CO % Conversion CxHy NOx Stoichiometric Point Air/Fuel Ratio 6EN2145 G424 Service Manual LPG Fuel System(Low Emission Version) 94