. OPERATION OPERATION Guideline for dial adjustment SOFT HARD Concrete debris Andesite Granite Limestone Sandstone Basalt Graywacke (Hard sandstone) 3 - 62 SETTING GRIZZLY FEEDER SP EED Contro l the flow of debris to be crush ed by adjusting the below mentioned grizzl y feeder s peed dial to the optimum conditi on according to the size of de bris and the crusher revolution speed Grizzly feeder speed dial This di al serves to control the speed (a) Minimum feeding speed (MIN): T (b) Maximum feeding speed (MAX): Turn the dial to the right end. SETTING JAW CRUSHER SPEE This di al serves to adjust the jaw cr (1)Minimum revolution (MIN): Turn t (2)Maximum revolution (MAX):
Turn REGULATING CHARGING AMOUNT IN CRUSHER CHAMBER (Crush er load setting dial) (1)Minimum charge: Turn the dial to (2)Maximum charge: Turn the dial to The op timum charging rate for the 60%, c onsidering the allowable wo consumable parts in the crusher ch This m achine is equipped with an functio n (excess charge preventive function). However the timing that th e automatic feeder stops feed ing is likely to vary according to the size and hardness of debris t o be crushed and their muck conten t, resulting in the change in the actual charged amount in the crushin g chamber.
Keep w atching the charging rate in th e crushing chamber for about an hou r after starting the work, an d adjust the crusher charge . setting dial to the optimum condition