. OPERATION TRANSPORTATION LOADING, UNLOADING WORK WARNING 3 - 99 Whe n loading or unl oading the machine, and travel at low spe Whe n loading or unl oading the machine, park a trailer on a level and solid roadbed. More over keep a good distance between the road chine. shoulder and the ma Mak e sure that ramp s have sufficient width, length and thickness, and securely fix them, in clined at less tha n 15 °. If an earth mound is employed, firmly compact it so tha t the slops will not c on the undercarriage beforehand so that the off sideways on the ramps. machine will not slip off sideways on the ramps. Furthermore remove water, snow, ice, grease, oil, etc. fr om the ramps, too.
Neve machine will slip off Retu Do n ot operate any ot her lever than the travel control leve r on the ramps. The center of gravit y of the machine suddenly shifts forward at the connecting point of t he ramps and trailer b ed, throwing t he machine off the b alance. Pass it s lowly for safety. Be s ure to install aft er unloading the rear view mirror, handrails, step, etc. that were remov ed when the machine was loaded. Don not start a work without them, because it is dangerous, leading t machines at the time of delivery) o an accident. (This applies to new machines at the t ime When loading or unlo ading, always use ramps or a platform. Proceed as fo