. MAINTENANCE OUTLINE OF SERVICE engine It KOWA ANALYSIS ITAMS Measurement of density of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to measure the density of iron, copper, and other metal wear particles in the oil. 4 - 5 COOLANT River water contains a large amou nt of calcium and other impurities. When using it for coola nt, scale will the engine cooling parts and ra overheating. Do not use such water for cooling diator, reducing the efficiency of heat exchange which will cause the engine that is not fit for drinking.
When using antifreeze, always ob serve the precautions given in the Operation a nd Maintenance Manua Komatsu new machines are shipp ed out with the Komatsu original antifreeze in t he cooling The Komatsu antifreeze is effecti need not be removed, even when Moreover it can be used for two y ve at preventing corrosion from developing on the machine is used in a temperate climate. ears or 4000 hours of operation continuously. tremely careful not to expose it to flame or fire. Antifreeze is flammable, so be ex Ratio of antifreeze differs accordi ng to the ambient temperature. For the proper mixing ratio , see the se "CLEAN INSIDE OF COOLING S YSTEM (PAGE 4-28)".
e engine to cool before adding coolant. If the engine overheats, wait for th If the coolant level is low, it will cau se overheating, and will also cause problems wi th corrosio n due to air e the coolant. GREASE and noises at the joints. Grease is used to prevent seizure Those grease fittings, which are n ot shown in the chapter of MAINTENANCE in th e manual, a re provided overhauling the machine, and as If twisting or friction noise is heard such there is no need to grease them. after a long operation of the machine, add grease. se that is pushed out when greasing.
after a long operation of the machine, add gre Always wipe off all of the old grea Be particularly careful to wipe off t wear of the rotating parts. he old grease in places where sand or dirt stick ing in the g rease would CARRYING OUT KOWA (Komat su Oil Wear Analysis) KOWA is a maintenance service that makes it possible to prevent machine failures a nd downtim e. With KO oil is periodically sampled and analy zed. This enables early detection of wear of the machine d rive parts an abnormalities. We strongly recommend you to use t his service.
The oil analysis is carried out at act ual cost, so the cost is l the results of the analysis are report ed together with recommendations which will red uce repair costs and m downtime.