. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING If inspection, cleaning, or maintenance is carried out with the engine running, dirt will get into the engine and damage it. CHECKING If air cleaner clogging monitor (1) of the monitor panel flashes, clean the air cleaner element. 4 - 25 efore carrying out these operations. When using compressed air, there is danger that dirt may be b lown around and cause serious injury sses, dust mask, and other protectiv NOTICE Do not clean the air cleaner element until the air cleaner clogging monitor on the monitor panel flashes .
If the element is cleaned fre quently before the clogging monitor flashes, the air cleaner will not be able to fully demonstrate its performance, and the cleaning efficiency will be al In addition, during the clean so lowered. ing work, dirt stuck to the element will more likely fall on the side of the i nner element. CLEANING OR REPLACING OUTER ELEMENT od, loosen wing nut (2) and band (3), 1. Open the engine ho remove cover (4) and (6). Cover the air connect clean cloth or tape so 2. Clean the interior of t wing nut (5), and then take out element or at the base of the air cleaner bo dy with that dust will not get in. he air cleaner body and cover (4). he air cleaner body and cover (4)